You might ask “Do I need to do a floor stripping service before applying a fresh coat of wax?” The short answer is, Yes. Floor stripping is crucial before applying a fresh coat of wax for several reasons, let’s go over them:

Removal of Old Wax Buildup:

  • Over time, layers of wax can accumulate on the floor, becoming discolored, uneven, and prone to scratching. Stripping removes these layers, allowing for a clean, even surface for the new wax to adhere to. Like when you prepare the surface before painting a car, flooring that has old layers of wax needs a similar surface prep. In this case, its Floor Stripping.
Old-wax-buildup-floor stripping
Old-wax-buildup-floor stripping wide
Old-wax-buildup-floor stripping wide
Old-wax-buildup-floor stripping wide

Better Adhesion:

  • Stripping removes dirt, grime, and any residual wax, creating a clean surface for the new coat of wax to adhere to. This ensures better adhesion and longevity of the new wax coat. Experienced property managers know getting the job done right the first time will save them complaints from the new tenant. Often taking short cuts only leads to an unhappy tenant, since the coat of wax doesn’t last the duration of the lease.

Enhanced Appearance:

  • Floor stripping the floor helps to restore its original appearance by removing stains, yellowing, and discoloration caused by old wax buildup. This results in a more attractive and polished finish.

Improved Durability:

  • By removing old wax and dirt, stripping prepares the floor to better withstand the daily wear and tear more effectively. The new wax coat will provide a protective barrier. This will make the flooring for the property more durable and easier to maintain.

Uniform Finish:

  • Last but definitely not least, stripping also ensures that the new wax coat will be applied evenly across the entire floor surface, avoiding any streaks or patches.
Floor Stripping Service Why you need it

What is "Floor Stripping"?

Floor stripping is the process of removing old layers of wax, sealants, or other finishes from a floor. This is done to prepare the surface for a new finish. It involves using chemical stripping agents and mechanical equipment such as floor scrubbers with abrasive pads or brushes to effectively lift and dissolve the old finish from the floor.

The steps involved in floor stripping for us include:

  • Preparation: Clearing the area of furniture and other obstructions, as well as ensuring proper ventilation.
  • Application of Stripping Solution: Applying a commercial floor stripping solution to the floor surface. This solution is left to dwell for a specific period to soften and dissolve the old finish.
  • Agitation: Using a floor scrubber or buffer equipped with stripping pads or brushes to agitate the stripping solution and loosen the old finish from the floor. This step may require multiple passes to ensure thorough removal.
  • Rinsing: Thoroughly rinsing the floor with clean water to remove any remaining stripping solution and residue.
  • Drying: Allowing the floor to dry completely before proceeding with the application of a new finish.

Floor stripping is essential for maintaining the appearance and integrity of hard floor surfaces, such as vinyl, linoleum, tile, and concrete. It removes accumulated dirt, grime, and old finish layers, creating a clean and smooth surface for the application of new finishes, such as wax, sealants, or coatings. Getting the Right Company to perform the floor stripping service ensures better adhesion and longevity of the new finish, resulting in a clean, attractive, and durable floor surface

What are some inferior waxing methods workers perform In order to save time from floor stripping?

Overall, floor stripping is essential for achieving a clean, attractive, and durable finish when applying a fresh coat of wax.

Some inferior waxing methods that workers might perform in order to save time from floor stripping an eroded coat of wax include:


  • Instead of properly stripping the old wax layer, workers may choose to simply apply a new coat of wax on top of the existing one. This method only masks the underlying issues and can lead to an uneven finish, poor adhesion, and premature wear of the new wax. Like it I said earlier a coat of wax that doesn’t last will only lead to a headache and regret. Companies that offer this method often are cheaper but in the end more costly.

Spot Waxing:

  • This approach is even more popular than overwaxing, rather than stripping the entire floor, workers might opt to spot wax only the visibly worn or high-traffic areas. They also can opt to strip only the most visible areas on the floor. While this approach may save time initially, it results in an uneven appearance and can exacerbate wear patterns over time. 
  • Below is a picture of a likely spot that would be stripped while the surrounding areas would simply be cleaned with solvent and overwaxed. For a longer lasting finish be sure to ask the company if they strip the entire floor. Work with a professional and have confidence that the floor will be completely stripped to ensure long lasting adhesion and a beautiful even finish.
Old-wax-buildup-floor stripping

Overall, while these methods seem to save time initially, they often result in inferior outcomes, increased long-term maintenance requirements, and ultimately higher costs. Proper floor stripping and waxing are essential for maintaining the appearance, durability, and longevity of the finish.

How long will a coat of fresh wax last?
On a Properly floor stripped floor vs only cleaning the floor?

The durability of a fresh coat of wax on a properly stripped floor versus a floor that has only been cleaned for surface preparation can vary significantly. Here’s a comparison:

Properly Stripped Floor with Fresh Coat of Quality Wax:

    • When a floor is properly stripped before applying a fresh coat of wax, the new wax adheres to a clean, smooth surface, free from any old wax buildup, dirt, or contaminants.
    • This allows the new wax to bond securely to the floor, providing excellent adhesion and durability.
    • A properly stripped floor can typically endure a fresh coat of wax for an extended period, ranging from a year or more, depending on factors such as foot traffic, maintenance practices, and the quality of the wax used.

Floor Cleaned for Surface Prep Only:

    • If a floor is only cleaned for surface preparation without being properly stripped, there may still be residual wax, dirt, or contaminants present on the surface.
    • While cleaning removes some surface debris, it may not effectively remove all traces of old wax buildup or deeply embedded dirt.
    • As a result, the new wax may not adhere as well to the floor, leading to reduced durability and longevity.
    • A floor that has only been cleaned for surface preparation may require more frequent re-coating, as the new wax may wear off more quickly due to poor adhesion.

In summary, a properly stripped floor with a fresh coat of wax will generally have better adhesion and durability compared to a floor that has only been cleaned for surface preparation. While both methods can improve the appearance and protection of the floor, investing the time and effort to strip the floor properly will likely result in longer-lasting results and reduced maintenance in the long run.

What are some other ways a company can cheapen the quality of a new coat of wax?

Diluting Wax:

    • Some workers may dilute the wax with water or other solvents to stretch the product and cover more area with less wax. However, diluted wax does not provide adequate protection or shine, and it can result in a patchy, dull finish.

Skipping Surface Preparation:

    • Proper surface preparation, including cleaning and degreasing, is essential for wax adhesion and longevity. Workers may skip or rush through this step to save time, leading to poor wax adhesion and premature peeling or flaking.

Using Low-Quality Wax Products:

    • In an effort to cut costs, workers may opt for cheaper, lower-quality wax products that offer inferior performance and durability. While this may save money upfront, it can result in the need for more frequent re-coating and ultimately higher maintenance costs.

Leave a Reply